| Quick
temperature-lowering, quick-freezing chambers are extremely
versatile and can be used to process any type of product
on trays arranged on dollies.
Our APF range chambers are particularly suitable for production
lines that do not need a high level of automation or are
not spacious enough to accommodate for large machines.
These chambers guarantee high productivity at very low
costs.
Models that come with the compressor unit integral with
the box are of compact size and easy to move, therefore
they are ideal for connection at the point of product
collection.
The refrigerating unit can be installed separately from
the box and can be connected to the evaporator through
appropriate isolated lines. This can be useful in the
case of fixed installations, in production floors that
have compressors installed outside the shop or in the
service area of the system.
Where a central cold-producing unit already exists, customers
may also request the freezer without the refrigerating
unit.
The machine is of stainless steel construction throughout
and can be arranged for external installation, leaving
only the front of the door inside the production floor.
See
the main characteristics of these machines:
• Refrigeration, obtained by means of a sealed refrigerating
compressor of adequate power, with air condensation, refrigerates
an evaporator in an isolated receptacle above the dollies.
The whole process is automatic.
• The refrigerator inner temperature is regulated
according to product needs. Temperature settings can range
from ambient temperature to -40°C
• The evaporator is equipped with an automatic,
rapid defroster that melts the condensate ice in a matter
of a few minutes. Defrost water is collected in a drip
and directed outside the box.
• Internal ventilation is afforded by fans that
provide constant air circulation on and around the product
• 100% stainless steel AISI 304 construction, with
satin finish
• trays are made of a stainless steel mesh or stainless
sheet steel
• dollies are made of stainless steel and are fitted
with wheels made of low-temperature resistant materials
• front caster wheels, rear fixed wheels
• 100 mm thick wall insulation obtained through
injections of self-extinguishing polyurethane foam
|